gpiosvr

• picossa module
  • Classes for serial communication
    • EdgeCallback
      • EdgeCallback.BOTH
      • EdgeCallback.FALLING
      • EdgeCallback.RISING
      • EdgeCallback.__init__()
      • EdgeCallback.call()
      • EdgeCallback.cancel()
    • ResponseFuture
      • ResponseFuture.__init__()
      • ResponseFuture.set_exception()
      • ResponseFuture.set_result()
    • PicoModem
      • PicoModem.__init__()
      • PicoModem.baud
      • PicoModem.responseFutures
      • PicoModem.appendEdgeCallback()
      • PicoModem.removeEdgeCallback()
      • PicoModem.sendRequest()
      • PicoModem.getUsingProcessIds()
    • PicoReceiverThread
      • PicoReceiverThread.__init__()
      • PicoReceiverThread.processBytes()
      • PicoReceiverThread.stop()
    • PicoSerialAdapter
      • PicoSerialAdapter.__init__()
      • PicoSerialAdapter.fromDiscovery()
      • PicoSerialAdapter.gpioToBitmask()
      • PicoSerialAdapter.gpioToGpioPullBitmask()
      • PicoSerialAdapter.stop()
      • PicoSerialAdapter.GPIO_get_functions()
      • PicoSerialAdapter.cancelCallback()
      • PicoSerialAdapter.openInput()
      • PicoSerialAdapter.closeInput()
      • PicoSerialAdapter.setDirection()
      • PicoSerialAdapter.close()
  • Constants for the picod deamon
    • MessageId
    • GpioFunction
    • RequestType
    • Expected
    • Status
    • Uart
    • Pwm
  • Internal constants and defaults
    • PICOD_CHANNEL_COUNT
    • SERIAL_RESPONSE_TIMEOUT_DEFAULT_MS
    • SERIAL_RESPONSE_CHECKING_INTERVAL_μS_DEFAULT
    • SERIAL_READ_BUFFER_BYTES_DEFAULT
    • CANCEL_CHECKING_INTERVAL_MS_DEFAULT
• picossa_pigs module
  • Classes
    • PigsScript
      • PigsScript.__init__()
    • PigsExecutor
      • PigsExecutor.__init__()
      • PigsExecutor.executeProcd()
      • PigsExecutor.executeProcp()
      • PigsExecutor.executeProcr()
      • PigsExecutor.executeProcs()
      • PigsExecutor.executeScript()
  • Constants and defaults
    • CANCEL_CHECKING_INTERVAL_μS_DEFAULT
    • UART_PAUSE_DEFAULT_MS
    • UART_READ_BUFFER_BYTES_DEFAULT
    • UART_READ_TIMEOUT_DEFAULT_MS
• signal module
  • Configuration classes
    • SignalConfig
      • SignalConfig.__init__()
    • SignalProtocolDescription
      • SignalProtocolDescription.__init__()
      • SignalProtocolDescription.fromConfig()
    • SignalListenerConfig
      • SignalListenerConfig.__init__()
  • Pulse event classes
    • PulseEvent
    • PulsesInterrupted
    • PulseEventIterator
      • PulseEventIterator.__init__()
      • PulseEventIterator.onArtificialEdge()
      • PulseEventIterator.onPulseInterruption()
      • PulseEventIterator.onSequenceEnd()
      • PulseEventIterator.onSingleEdge()
    • SignalListener
      • SignalListener.__init__()
      • SignalListener.fromConfig()
      • SignalListener.createPulseEventIterator()
      • SignalListener.pulseEventToKeyEvents()
      • SignalListener.waitForKeyEvents()
      • SignalListener.injectKeyCode()
      • SignalListener.describeProtocol()
  • Constants and defaults
    • TOLERANCE_PERCENTAGE_DEFAULT
    • DEBOUNCE_μS_DEFAULT
    • BitOrder
      • BitOrder.LSB_FIRST
      • BitOrder.MSB_FIRST
    • BIT_ORDER_DEFAULT
    • CODE_START_BIT_DEFAULT
    • MAX_BASE_PULSE_COUNT
  • Helper classes
    • PulseHelper
      • PulseHelper.paramsToBitCount()
      • PulseHelper.sequenceToBasePulseCount()
      • PulseHelper.sequenceToHexCodes()
• client module
  • Classes
    • Response
      • Response.encodeException()
      • Response.decodeExceptions()
      • Response.decode()
      • Response.encode()
      • Response.append_exception()
      • Response.result()
      • Response.set_result()
      • Response.set_exception()
      • Response.exception()
      • Response.exceptions()
      • Response.done()
    • SocketClient
      • SocketClient.stop()
  • Constants and defaults
    • GpioDirection
    • GpioLevel
    • GpioPull
    • RequestDelimiters
• client_pigpio module
  • Interfaces
    • PigpioMinimalApi
      • PigpioMinimalApi.set_mode()
      • PigpioMinimalApi.get_mode()
      • PigpioMinimalApi.set_pull_up_down()
      • PigpioMinimalApi.read()
      • PigpioMinimalApi.write()
      • PigpioMinimalApi.get_current_tick()
      • PigpioMinimalApi.stop()
    • PigpioCallbackApi
      • PigpioCallbackApi.set_watchdog()
      • PigpioCallbackApi.set_glitch_filter()
      • PigpioCallbackApi.callback()
    • PigpioPwmApi
      • PigpioPwmApi.set_PWM_dutycycle()
      • PigpioPwmApi.get_PWM_dutycycle()
      • PigpioPwmApi.set_PWM_range()
      • PigpioPwmApi.get_PWM_range()
      • PigpioPwmApi.get_PWM_real_range()
      • PigpioPwmApi.set_PWM_frequency()
      • PigpioPwmApi.get_PWM_frequency()
      • PigpioPwmApi.hardware_PWM()
    • PigpioScriptApi
      • PigpioScriptApi.store_script()
      • PigpioScriptApi.run_script()
      • PigpioScriptApi.script_status()
      • PigpioScriptApi.delete_script()
  • Constants and defaults
    • pigpio
      • pigpio.INPUT
      • pigpio.OUTPUT
      • pigpio.PUD_OFF
      • pigpio.PUD_DOWN
      • pigpio.PUD_UP
      • pigpio.RISING_EDGE
      • pigpio.FALLING_EDGE
      • pigpio.EITHER_EDGE
      • pigpio.TIMEOUT
      • pigpio.PI_SCRIPT_INITING
      • pigpio.PI_SCRIPT_HALTED
      • pigpio.PI_SCRIPT_RUNNING
      • pigpio.PI_SCRIPT_WAITING
      • pigpio.PI_SCRIPT_FAILED
      • pigpio.tickDiff()
• client_pigs module
  • Classes
    • PigpioSocketClient
      • PigpioSocketClient.stop()
• client_picod module
  • Interfaces
    • PicodApi
      • PicodApi.serial_open()
      • PicodApi.serial_read()
      • PicodApi.serial_write()
      • PicodApi.serial_close()
      • PicodApi.reset()
      • PicodApi.uid()
      • PicodApi.sleep()
      • PicodApi.tick()
  • Constants and defaults
    • GpioFunction
      • GpioFunction.XIP
      • GpioFunction.SPI
      • GpioFunction.UART
      • GpioFunction.I2C
      • GpioFunction.PWM
      • GpioFunction.GPIO
      • GpioFunction.PIO0
      • GpioFunction.PIO1
      • GpioFunction.GPCK
      • GpioFunction.USB
      • GpioFunction.NULL
    • Status
      • Status.OKAY
      • Status.BAD_CHANNEL
      • Status.CHANNEL_CLOSED
      • Status.NO_REPLY
      • Status.GPIO_IN_USE
      • Status.TIMED_OUT
      • Status.ERROR
    • Uart
      • Uart.TX
      • Uart.RX
      • Uart.CTS
      • Uart.RTS
      • Uart.PARITY_NONE
      • Uart.PARITY_EVEN
      • Uart.PARITY_ODD
    • Pwm
      • Pwm.CLOCK_HZ
• shell module
  • Classes
    • GpioControlShell
      • GpioControlShell.__init__()
      • GpioControlShell.addStandardArgs()
      • GpioControlShell.gpioClient
    • GpioServiceControlShell
      • GpioServiceControlShell.__init__()
  • Constants and defaults
    • GpioStrategy
• gpio_server executable
  • Arguments
  • Classes
    • UnixSocketServer
• key_monitor executable
  • Arguments
• pigs executable
  • Arguments
• leds executable
  • Arguments